DEES HYDRAULIC PRESSES/HP SERIES

FEATURES

Standard FEATURES

RUGGED FRAME DESIGNED BY FINITE ELEMENT ANALYSIS
THE PISTON/CYLINDER BORE HARDENED & POLISHED TO A FINE FINISH
ADAPT RIGID ROUND GUIDES,SLIDE COULD MOVE SMOOTHLY
ADAPT INTEGRATED COMPACT MANIFOLD DESIGN,WITH MAX WORKING PRESSURE,RELIEF VALVE CIRCUIT DESIGN FOR ENERGY SAVING AND OPERATION SAFETY
ADVANCED VARIABLE 2 SPEED CONTROL.FAST APPROACH THEN SLOW PRESSING
FULLY ADJUSTABLE STROKE LENGTH THROUGH LIMIT SWITCHES OR OPTIONAL TOUCH SCREEN CONTROL
FRIENDLY SET ON THE SWITCHES OF TDC,SLOW SPEED POINT & BDC
T-STAND WITH EMERGENCY BUTTON IN ACCORDANCE WITH SAFETY REGULATION
KEY PROTECTED SWITCH PROVIDES INCH,SINGLE-STROKE & OFF MODE SELECTION

SPECIFICATIONS

Standard
Model	Capacity	Table Size	Table Height	Motor	Daylight	Stroke	Speed(mm/sec)
Model	Ton	mm	mm	HP	mm	mm	UP	Down	Pressing
HP-10	10	500×350	750	2	350	250	120	60	18
HP-20	20	400×600	750	5	500	350	120	60	18
HP-30	30	700×500	750	7.5	500	350	120	60	18
HP-50	50	700×500	750	10	500	350	120	60	15
HP-100	100	1000×700	900	15	700	500	120	60	10
HP-200	200	1000×700	900	20	700	500	130	130	8
HP-300	300	1200×800	1100	30	800	600	140	140	8
HP-400	400	1200×800	1100	40	800	600	180	180	8
HP-500	500	1500×900	1300	50	900	600	180	180	7
HP-600	600	1500×900	1300	50	900	600	180	180	6

Optional
Model	Cushion			Ejector		High speed
	Table	Capacity	Stroke	Capacity	Stroke	Motor	UP	Down	Pressing
	mm	Ton	mm	Ton	mm	Hp	mm/sec	mm/sec	mm/sec
HP-10	400×300	5	120	3	60	5	270	270	18
HP-20	400×300	5	120	3	60	5	270	270	18
HP-30	400×300	5	120	3	60	7.5	270	270	18
HP-50	400×300	10	120	3	60	10	270	270	15
HP-100	600×400	20	150	10	75	15	250	250	10
HP-200	600×400	50	150	10	75	25	270	270	10
HP-300	700×500	75	200	20	100	40	270	270	10
HP-400	700×500	75	200	20	100	50	250	250	10
HP-500	800×600	100	200	30	100	75	270	270	10
HP-600	800×600	100	200	30	100	75	270	270	10