OCP SERIES

MECHANICAL PRESS

Super rigid press frame.
High driving torque wet type clutch & brake.
Box type Six-point precision gib.
Low deflection.
Quick die change systems
Fixed Type Operation Stand
E-Series Control System
.Electronic Crank Angle Display
.Electronic SPM Display
.LED type Press status monitor
Operation Mode Selection
Off / Inching / Safety One
Stroke / Continuous
Hydraulic Overload Protector (H.O.L.P)
Overrun Detector
Dual-coiled Solenoid Valve
Motorized Slide Adjustment (above 60-260ton)
Die Height Indicator (Unit:0.1mm)
Motorized Grease Lubrication Device
Air Ejector, 3/8″
Air Source Receptacle, 3/8″
Life Counter 10 digits
Electronic Rotary Cam Switch, 6 spare channel
Inverter & Main Motor Reversing Circuit Device

MODEL			OCP-25			OCP-35			OCP-45
TYPE			S	H	L	S	H	L	S	H	L
Capacity		Tons	25			35			45
Rated tonnage point (above B.D.C.)		mm	3.2	2.3	3.2	3.2	2.3	3.2	3.2	2.3	3.2
Stroke length		mm	50	40	80	60	40	90	70	50	110
Strokes per minute	Fixed	S.P.M.	–		90	–		80	–		70
Strokes per minute	Variable	S.P.M.	80-140	80-180	70-110	70-130	80-170	60-95	60-120	80-160	50-85
Die height(S.D.A.U.)		mm	245	250	230	250	260	235	290	300	270
Slide area(L.R. x F.B.)		mm	350×300			380×320			430×350
Bolster area(L.R. x F.B.)		mm	720×320			780×340			850×440
Bolster thickness		mm	70			70			90
Slide adjustment		mm	50			50			60
Main motor		HP×p	5×4			5×4			7.5×4
Slide adjusting motor		HP×p	Manual			Manual			Manual
Working Height		mm	800			800			800
Maximun Upper Die Weight		kg	260			300			300

MODEL			OCP-60			OCP-80			OCP-110
TYPE			S	H	L	S	H	L	S	H	L
Capacity		Tons	60			80			110
Rated tonnage point (above B.D.C.)		mm	4	2.3	4	5	3.2	5	5	3.2	5
Stroke length		mm	80	50	130	100	60	150	110	70	180
Strokes per minute	Fixed	S.P.M.	–		60	80	100	60	70	90	50
Strokes per minute	Variable	S.P.M.	55-110	70-150	40-75	50-100	65-140	40-75	45-90	60-130	30-65
Die height(S.D.A.U.)		mm	325	340	300	355	375	330	385	405	350
Slide area(L.R. x F.B.)		mm	500×400			560×460			650×520
Bolster(L.R. x F.B.)		mm	900×520			1000×600			1150×680
Bolster thickness		mm	90			100			120
Slide adjustment		mm	70			80			90
Main motor		HP×p	7.5×4			7.5×4			10×4
Slide adjusting motor		HP×p	0.5(0.4kW)×4			0.5(0.4kW)×4			0.5(0.4kW)×4
Working Height		mm	800			830			845
Maximun Upper Die Weight		kg	300			345			450

MODEL			OCP-160			OCP-200			OCP-260
TYPE			S	H	L	S	H	L	S	H	L
Capacity		Tons	160			200			260
Rated tonnage point (above B.D.C.)		mm	6	4	6	6	4	6	6	4	6
Stroke length		mm	130	80	200	150	100	200	180	100	250
Stroke per minute	Fixed	S.P.M.	60	80	45	50	65	35	45	55	30
Stroke per minute	Variable	S.P.M.	35-70	50-100	20-50	35-70	45-95	25-50	30-60	35-75	20-40
Die height(S.D.A.U.)		mm	435	460	400	475	500	450	485	525	450
Slide area(L.R. x F.B.)		mm	700×580			850×650			920×700
Bolster area(L.R. x F.B.)		mm	1250×760			1400×820			1550×840
Bolster thickness		mm	150			160			180
Slide adjustment		mm	100			110			120
Main motor		HP×p	15×4			20×4			20×4
Slide adjusting motor		HP×p	1(0.75kW)×4			1(0.75kW)×4			2(1.5kW)×4
Working Height		mm	915			1020			1120
Maximun Upper Die Weight		kg	540			800			800