SC1 SERIES

MECHANICAL PRESS

High torque wet clutch & brake.
Quick response overload protector.
Box type six-point gib.
Bolt-to-the-bolster die cushion.
The superior rigidity provides the frame deflection to keep die hight and dynamic off-center load deviation with a minimized amount.
Portable 2-hand Pushbutton T-stand
E-Series Control System
Electronic Crank Angle Display
Electronic SPM Display
LCD type Press statuse monitor
Operation Mode Selection
Off / Inching / Safety One Stroke / Continuous
Hydraulic Overload Protector(H.O.L.P)
Overrun Detector
Door interlocking power isolation switch
Dual-coiled Solenoid Valve
Motorized Slide Adjustment
Inverter & main motor reversing circuit
Digital Die Height Indicator(Unit:0.1mm)

MODEL			SC1-80			SC1-110			SC1-160
Type			S	H	L	S	H	L	S	H	L	XL
Capacity		Tons	80			110			160
Rated Tonnage point(Above B.D.C.)		mm	5	3.2	5	5	3.2	5	6	4	6
Stroke Length		mm	100	60	160	110	70	180	130	80	200	250
Stroke Per Minute	Variable Speed	S.P.M.	–		60	–		50	–		45
Stroke Per Minute	Fixed Speed	S.P.M.	55~110	75~150	40~75	50~100	65~135	30~65	40~85	55~115	25~50	20~45
Die Height(S.D.A.U)		mm	300		330	320		350	350		450
Maximum Upper Die Weight		kg	400			450			700
Slide Adjustment		mm	80			90			100
Bolster Area(L.R×F.B)		mm	750×460		750×600	900×520		900×700	1000×580		1000×750
Slide Area (L.R×F.B)		mm	560×460			650×520			700×580
Main Motor		KW×P	5.5×4			7.5×4			11×4
Main Motor		HP×P	7.5×4			10×4			15×4
Slide Adjusting Motor		KW×P	0.4×4			0.4×4			0.5×4
Slide Adjusting Motor		HP×P	0.5×4			0.5×4			0.75×4

MODEL			SC1-200				SC1-260				SC1-300
TYPE			S	H	L	XL	S	H	L	XL	XL
Capacity		Tons	200				260				300
Rated Tonnage Point(Above B.D.C.)		mm	6	4	6		6.5	4	6.5		7
Stroke Length		mm	150	95	200	250	180	100	250	300	300
Stroke Per Minute	Variable Speed	S.P.M.	–		35		–		30		30
Stroke Per Minute	Fixed Speed	.S.P.M	35 ̴ 70	45 ̴ 95	20 ̴ 45	20 ̴ 40	30 ̴ 60	40 ̴ 75	20 ̴ 40	20 ̴ 35	20 ̴ 35
Die Height(S.D.A.U)		mm	410		450		460		500	540	550
Maximum Upper Die Weight		kg	800				800				900
Slide Adjustment		mm	110				120				120
Bolster Area(L.R×F.B)		mm	1150×650		1150×850		1300×700		900×1300		1000×1600
Slide Area(L.R×F.B)		mm	850×650				920×700				1400×900
Main Motor		KW×P	15×4				18.5×4				22×4
Main Motor		HP×P	20×4				25×4				30×4
Slide Adjusting Motor		KW×P	0.75×4				1.5×4				2.2×4
Slide Adjusting Motor		HP×P	1×4				2×4				3×4

MODEL	SC1-80			SC1-110			SC1-160
TYPE	S	H	L	S	H	L	S	H	L	XL
A	1230			1365			1500
B	2820		2880	2980		3045	3410		3565	3710
C	750			900			1000
D	460		600	520		700	580		750
E	560			650			700
F	460			520			580
G	833	853	833	840	860	840	915	940	915
H	400	360	490	430	390	530	480	430	650	700
I	820			940			1050
J	510		650	570		750	630		800
K	430		460	470		500	510		560	610
L	1260		1305	1455		1530	1625		1710	1670
M	1040			1175			1310
N	1730		1800	1950		2040	2205		2290
O	1348			1488			1618
P	1410		1470	1445		1448	1590		1460
C	1150				1300				1600
D	650		850		700		900		1000
E	850				920				1400
F	650				700				900
G	1010	1037.5	1010		1100	1140	1100		1210
H	560	505	650	700	640	560	750	840	850
I	1200				1350				1660
J	700		900		750		950		1100
K	570		610		620		660	700	750
L	1825		1925		1930		2030		2125
M	1560				1690				2030
N	2490		2590		2655		2755		2945
O	1788				1978				2308
P	1480				1630				1435
Q	3915		3930	3960	4280		4380	4420	4430